JE Pistons for Audi A3, A4, A6, S3, TT 1.8T 20V C/R: 8.5:1

Product number: JE-2429092

€910.35 *

product properties

Product number: JE-2429092
Manufacturer: Audi
Model: A3

JE pistons for

Audi A3, A4, A6, S3, TT 1.8T 20V

**Must remove oil squirters or use adequate spacers on

VW/Audi FSR Series - FSR Series Calculated at "Zero" Deck and .040 gasket

Part No Bore Over- size (mm) Stroke (mm) Rod (mm) C/D (mm) Head CC´s C/R with 040 Dish/ Dome CC´s Gram Foot- note

Skirt

JE-242909 81.0 STD 86.4 144 32.66 43 8.5:1 -8.1 296 T R
JE-302020** 81.0 STD 86.4 144 32.66 43 8.5:1 -10.6 278 T F
JE-242926 81.5 0.5 86.4 144 32.66 43 8.5:1 -8.7 304 T R
JE-302022** 81.5 0.5 86.4 144 32.66 43 8.5:1 -11.3 284 T F
JE-242928 82.0 1.0 86.4 144 32.66 43 8.5:1 -9.3 310 T R
JE-302024** 82.0 1.0 86.4 144 32.66 43 8.5:1 -12.0 Call T F
JE-295742 82.5 1.5 86.4 144 32.66 43 8.5:1 -12.2 307 T R
JE-302026** 82.5 1.5 86.4 144 32.66 43 8.5:1 -12.7 289 T F
JE-295744 83.0 2.0 86.4 144 32.66 43 8.5:1 -12.9 310 T R
JE-302028** 83.0 2.0 86.4 144 32.66 43 8.5:1 -13.4 293 T F

Footnotes:

F FSR (Forged Side Relief)
G Stock Block Must Be Re-Sleeved
L Limited Availability
M Made to Order
N Must sleeve block
R Full Round Skirt
T Accepts Turbo and Nitrous
U Not Designed for use with Turbo or Nitrous
V Accepts Nitrous


JE designs are specifically engineered for extreme applications up to, and including, professional competition.
In this environment, the higher compression ratios, highest boost or heavy nitrous usage necessitate the higher tensile
strength 2618 aluminum alloy.
Dome/Dish requires no deburring or preparation and feature smooth flowing radii for excellent flame travel.
Pin fitting, wire locks, and rings included.

A3, A4, A6, S3, TT 1.8T 20V