Cylinderhaed machining - Cylinder head assembling 5-Cyl. 10V

Product number: 01.050.061

€99.00 *

product properties

Product number: 01.050.061

Cylinderhead machining


Cylinder head assembling

5 - Cylinder 10 Valves


Please send us you cylinderhead!.


The cylinder head machining offered by dbilas dynamic is a modification of the flow characteristics of the cylinderhead of a combustion engine.
The objective of this modification is it to facilitate the aspiration and the giving out of the air/fuel mixture for the engine.
Also here the improvement of the cylinder filling is the objective.
With the aid of the in-house flow bench an optimal machining of a cylinder head is possible.
With this flow bench it is possible to simulate an aspirating engine.
During this simulation the air flow can be calculated with a test fluid and then from that the in theory possible performance of the engine can be determined.
In this way it is possible to localize bottlenecks and to remove these calculated, without widening places which are already big enough and influencing the combustion because of that negatively.
You can individually combine your cylinder head machining.

Following optimizations can be carried out at all cylinderheads:

  • Flow-optimal machining of the inlet and outlet ports
  • Streamlined machining of the valves
  • Cutting and funnel-shaped milling of the valve seats
  • Raising the compression ratio
  • Adaptation of the intake and exhaust manifolds to the machined ports of the cylinderhead
  • Bigger valves
  • Cutting the valve seats for bigger valves


Additionally, dbilas dynamic is able to recondition cylinder heads completely.
Following reconditions and repairs respectively can be carried out at cylinder heads:

  • Valve cones regrinding
  • Valve guides revamping
  • Valve seat machining
  • Valve seat revamping
  • Cylinder head planishing

5 Cylinder 10 valves